ProSeal CSTD
ProSeal™ is a family of Closed System Transfer Devices (CSTD) to safely transfer drugs and reduces exposure throughout the drug delivery chain from pharmacy compounding to patient administration.
ProSeal CSTD Adapter Models
Proseal Injector
Needleless connectors do not provide the same features and performance in comparison to ProSeal™ Injector.
It seals the contents of the syringe and opens a fluid path only when the assembly is connected to a ProSeal™ CSTD component.
The contents are never exposed and there is no residue after administration.
It also functions as a distal connector of an infusion source like an IV Line from any Infusion Pump, SMARTeZ Pump or Gravity Bags and connects easily to a patient’s access site with a click instead of screw thread rotations.
Proseal Injection Site
With JustONE Patient Controller Anaesthesia Pumps, both bolus and flow selection functions are integrated in one patient-controlled device. The maximum bolus volume is 2 ml. The bolus Refill or Lock Up times are available as customizable options.
ProSeal Permanent Injector
It seals the contents of the syringe and opens a fluid path only when the assembly is connected to a ProSeal™ CSTD component.
ToxiSeal Vial Adaptor
ToxiSeal™ Vial Adaptors provide safe access to drug vials while protecting the drugs from contaminants.
ToxiSeal Vial Adapter Models
ToxiSeal™ Vial Adaptor with External Balloon (DMA Compatible)
The ToxiSeal Vial Adaptors seal the closure of the vial to which it is attached.
The Air Vent assembly consists of 2 layers of filtration membranes, a hydrophobic 0.1-micron sterile filter and an activated carbon filter that absorbs drug aerosols and vapour.
The external balloon collects drug aerosols and volatile organic compounds released due to un-equalized pressure in the vial during compounding.
The fluid path of ToxiSeal Vial Adaptors is made of Tritan TM Copolyester material, which is compatible to DMA (Dimethylacetamide) solvent in chemotherapy drugs.
ToxiSeal™ Vial Adaptor (DMA Compatible)
The ToxiSeal Vial Adaptors seal the closure of the vial to which it is attached.
The Air Vent assembly consists of 2 layers of filtration membranes, a hydrophobic 0.1-micron sterile filter and an activated carbon filter that absorbs drug aerosols and vapour.
The fluid path of ToxiSeal Vial Adaptors is made of TritanTM Copolyester material, which is compatible to DMA (Dimethylacetamide) solvent in chemotherapy drugs.
CSTD Accessories
ProSeal™ IV Bag Spike
Designed for both pharmacy compounding and nursing administration.
Adaptor between IV bag and ProSealTM system for closed fluid transfer from or to IV bag.
ProSeal™ IV Bag Spike with Additive Port and NFV Outlet
Designed for both pharmacy compounding and nursing administration.
The additive side port (injection site) allows the injection of medication into the bag using ProSeal Injector (Syringe Adaptor) Ref 421010.
ProSeal™ Catheter Adaptor
The ProSeal Catheter Adaptor is the interface for any standard Foley catheters.
When connected to the drainage port on a catheter and engaged with a ProSeal Injector (Syringe Adaptor) Ref 421010, fluid can be administered to the catheter in a closed system.
Solutions for Intravesical hazardous procedure.
ProSeal™ Secondary Set
The ProSeal Secondary Set is the interface for patient administration of drugs and fluids to an IV site in a closed system.
The additive side port (injection site) allows the injection of medication into the bag using ProSeal Injector (Syringe Adaptor) Ref 421010.
ProSeal™ Closed System Priming Cap
When ProSeal’s Injector is used at the fluid outlet of an IV line, the line can be primed within a closed system by attaching Priming Cap to ProSealTM Injector.
A sterile hydrophobic filter prevents spillage when the line is fully primed and also prevents any ambient contaminant from entering the closed system.
ProSeal™ Syringe to Syringe Transfer
Allows safe transfer of cytotoxic drugs from one syringe to another syringe